Diy Electric Toothbrush Holder And Toothpaste
When it comes to keeping your teeth clean, there is no such thing as being too diligent. Brushing twice a day, flossing regularly, and using mouthwash are all great habits to develop. But what about giving your toothbrush and toothpaste a little extra TLC?
If you’re looking for a way to do just that, consider making your own electric toothbrush holder and toothpaste dispenser. Not only will this help keep your bathroom counters tidy, but it will also give you peace of mind knowing that your dental hygiene supplies are stored in a clean and safe place.
If you’re like most people, you probably don’t give much thought to where you store your toothbrush and toothpaste. But if you’re short on space in your bathroom, it can be helpful to have a place to keep them that’s both stylish and functional. Enter the DIY electric toothbrush holder and toothpaste dispenser!
With just a few supplies from the hardware store, you can make this handy little organizer that will help keep your bathroom countertop clutter-free. Plus, it’s a great way to recycle an old mason jar!
To make your own DIY electric toothbrush holder and toothpaste dispenser, start by drilling two holes in the lid of the mason jar.
Next, thread a length of electrical wire through the holes and secure with tape or glue. Finally, add your toothbrush and toothpaste (I prefer squirtable tubes for this) and voila!
You now have a cute and handy way to store your oral care essentials.
And when it comes time to brush your teeth, simply push down on the lid of the jar to dispense just the right amount of toothpaste onto your brush. No more mess, no more wasted product!
How Do You Make an Electric Toothbrush Holder?
Most electric toothbrush holders are made of plastic. To make one, you will need a piece of plastic that is at least 3 inches wide and 6 inches long. You will also need a drill and a 1/4 inch drill bit.
First, use the drill to make two holes in the piece of plastic, one near each end. Next, thread a length of wire through the holes. The wire should be long enough to reach from the outlet to the sink.
Finally, connect the wire to the outlet and plug in your toothbrush.
What Can I Use for a Toothbrush Holder?
When it comes to toothbrush holders, there are a few different things that you can use. The most common type of toothbrush holder is a cup. This is because cups are easy to find and they can hold a lot of toothbrushes.
However, you can also use other things like mugs or bowls. If you want something that is more decorative, you can use a vase or a jar.
How Do I Organize My Toothbrush And Toothpaste?
Assuming you would like tips on organizing your toothbrush and toothpaste:
One way to organize your toothbrush and toothpaste is by using a cup or holder. This way, everything will have its own designated spot and be less likely to get lost.
Another tip is to keep the items out of direct sunlight or heat, as this can damage them. It’s also important to make sure the cup or holder is clean before using it.
You can also store your toothbrush and toothpaste in a drawer, provided it’s clean and dry.
If possible, put them in a container or wrap them in something so they don’t come into contact with other items in the drawer. This will help keep them sanitary. Again, avoid storing them in direct sunlight or heat.
Ultimately, it’s up to you how you want to organize your toothbrush and toothpaste. The most important thing is that they’re stored properly (i.e. not exposed to too much sun or heat) and kept clean.
How Do You Make a Wooden Toothbrush Holder?
To make a wooden toothbrush holder, you will need:
-A block of wood (any type will do)
-A drill
-A saw (a hand saw or power saw will work)
-Sandpaper
-Paint or a sealant (optional)
1. Start by measuring and marking out where you want to cut your piece of wood. Make sure to leave enough room for the handle of your toothbrush!
2. Cut along your lines with the saw, being extra careful not to injure yourself.
3. Once your piece is cut to size, use sandpaper to smooth down any rough edges.
4. Now it’s time to drill a hole in the center of your block of wood. This is where the toothbrush will go!
5. If desired, paint or seal your holder before use. And that’s it – now you have a custom wooden toothbrush holder!
Make A Perfect Toothbrush Holder With Plastic Bottle || ALL DIY Crafts
5-Minute Crafts Toothbrush Holder
Are you tired of your toothbrush constantly falling out of the holder and onto the floor? If so, then this 5-minute craft is for you! With just a few supplies, you can make your very own toothbrush holder that will keep your brush secure and off the ground.
You’ll need: -a mason jar with lid -hot glue gun & glue sticks
-scissors -paint (optional) First, start by painting the outside of the mason jar, if desired.
Let it dry completely before moving on to the next step. Next, use hot glue to attach the screw part of the lid to the inside of the jar. Make sure that it is securely in place.
Then, cut a small hole in the center of the lid using scissors. The hole should be big enough for your toothbrush to fit through. Now your toothbrush holder is complete!
Simply insert your brush into the hole and screw on the lid. Your brush will stay put and off of dirty floors!
Toothbrush Holder Ideas Pinterest
There are so many fun and creative ways to store your toothbrush! If you’re looking for some inspiration, be sure to check out Pinterest. Here are a few of our favorite ideas:
1. Use a mason jar or other glass container. This is a great way to show off your toothbrush while keeping it clean and dust-free. Plus, it’s super easy to DIY!
Just add a little bit of paint or decoration to the outside of the jar and voila!
2. Create a unique holder out of clay. This is a great project for kids or adults who enjoy working with their hands.
Simply roll out some clay, shape it into whatever design you like, and bake it in the oven. Once it’s cooled, your toothbrush holder is ready to use!
3. Repurpose an old candle holder.
Have an old candle holder that you don’t use anymore? Upcycle it into a chic toothbrush holder! Just remove the bottom of the candle holder (be careful not to break it) and voila – instant toothbrush storage that looks great on any countertop.
4. Hang up your toothbrush with command strips . If you’re short on space, this is a great solution! All you need are some command strips and a cute hook (or two) and you can easily hang up your toothbrush right next to the sink.
No more cluttered countertops!
Diy Toothbrush Holder for Travel
When it comes to packing for travel, finding a place to store your toothbrush can be a challenge. If you’re looking for a convenient and easy way to keep your toothbrush clean and accessible while on the go, consider making your own DIY toothbrush holder. This simple project can be completed in just a few minutes using materials that are readily available at most hardware stores.
To get started, you’ll need some basic supplies including: a small piece of wood (we used a 1″ x 2″ board), sandpaper, wood glue, clamps, and paint or stain (optional). Start by cutting your piece of wood to size – we cut ours to 4″ long. Next, use sandpaper to smooth any rough edges on the wood.
Once the edges are smooth, apply a liberal amount of wood glue to one end of the board and clamp it in place until dry.
Once the glue is dry, your holder is ready to use! If desired, you can add a coat of paint or stain before using.
We opted for a simple white paint job so our holder would blend in with our bathroom décor. When it’s time to pack up for your next trip, simply pop your toothbrush into the holder and toss it into your suitcase – no more worries about germs or misplaced toothbrushes!
How Can I Incorporate a Toothpaste Holder into My DIY Electric Toothbrush Head Holder?
If you are looking to incorporate a toothpaste holder into your DIY electric toothbrush head holder, there are a few options. Consider adding a small shelf or tray on top of the holder to hold your toothpaste. Alternatively, you can attach a toothpaste dispenser directly onto the electric toothbrush head holder for convenience. Experiment and find the best solution for your needs.
How to Make Toothbrush Holder from Plastic Bottles
We all know that toothbrushes are an important part of our daily hygiene routine. But what do you do with your toothbrush when you’re not using it? A lot of people just leave their toothbrush out on the counter, which can lead to a messy bathroom.
Others put their toothbrush away in a drawer, only to forget about it until they need it again. The best way to keep your toothbrush clean and organized is to use a toothbrush holder.
A lot of people think that they need to buy a special toothbrush holder from the store.
But did you know that you can actually make one yourself out of a plastic bottle? It’s really easy to do and it only takes a few minutes. Plus, it’s a great way to recycle those plastic bottles!
Here’s what you’ll need:
-1 plastic bottle (any size will work)
-scissors
-hot glue gun & glue sticks
Conclusion
This blog post is all about how to make your very own electric toothbrush holder and toothpaste dispenser. It gives step-by-step instructions on what materials you will need and how to put it all together. This project is perfect for anyone who wants to save a little money and have a more organized bathroom countertop.
Plus, it looks really cool too!
